Microcontrollerprojekty

Filtruj

Moje ostatnie wyszukiwania
Pokaż:
Budżet
dla
dla
dla
Typ
Umiejętności
Języki
    Stan Projektu
    6,296 microcontroller znalezione projekty, cennik w USD
    Elektrotechnik Zakończone left

    Potrzeba microcontroller na zamowienie z 4gb ram.

    $17 / hr (Avg Bid)
    $17 / hr Średnia Oferta:
    1 składanie ofert

    Usługa programowania układów scalonych typu: - GAL - EPROM - EEPROM - Serial EEPROM - FLASH - Serial FLASH - NAND Flash - Static RAM - Microcontroller - PLD - JTAG Stosowany jest programator UPROG firmy RK-System. Cena za usługę do negocjacji uzależniona od rodzaju i wielkości zlecenia. Kontakt: email: radioserwis@ tel: 608-793-438

    min $3
    min $3
    0 składanie ofert

    Electrical devices are attached to computer/android machine through Microcontroller over LAN/wifi . These devices are to be switched ON/OFF Socket Programming is to be used . 4 relays are to Switch On/Off from Software. Relay ON/Off commands will be given. Same is to be executed through software buttons Microcontroller will send feedback , that is to be listened & decoded in software. Software GUI It will be 2 Page GUI : Dashboard Page , Settings Page Dashboard Page : Operation/Execution of & Status of commands through buttons & its display Settings Page : Do necessary settings wrt LAN IP, Wifi Etc VB, C# Android : Socket programming code can be provided

    $110 (Avg Bid)
    $110 Średnia Oferta:
    2 składanie ofert

    The project description is to use Microchip Studio 7.0 and ATmega32A microcontroller to develop codes to build a digital safe application in both C and Assembler for six user combinations. At least 8-digits are required for one combination. The LEDs are used to indicate the entered digits and code-set. The EEPROM is also used for storing when the entered code is incorrect. After the code is set, it must be able to re-program (can change the password).

    $96 (Avg Bid)
    $96 Średnia Oferta:
    9 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am looking for either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. I will ask you a question which you must answer correctly, in order to prove to me that you are very intelligent. You must be able to work for five days each week for one hour per day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) t...

    $13 / hr (Avg Bid)
    $13 / hr Średnia Oferta:
    9 składanie ofert

    I have designed a custom gaming keyboard with a wired USB interface, based on a PIC16F1459-I/SS Microchip controller. REQUIREMENTS:1) Develop a keyscanning routine to scan 41 keys, perform software debounce on detected key activity, and report key press/release by sending appropriate USB keycode to PC. 2) Develop code in C with MPLAB-X-IDE tool (free from Microchip website). 3) I have an MPLAB PICkit-4 unit for programming and debug. 3) My budget is $100.00 Thank you for your interest.

    $30 - $250
    Ukryte Projekt z Umową o Zachowaniu Poufności
    $30 - $250
    9 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. I will ask you a question that you must answer correctly, to prove to me that you are very intelligent. You must be able to work for five days each week for one hour per day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) that you would ...

    $17 / hr (Avg Bid)
    $17 / hr Średnia Oferta:
    14 składanie ofert

    The Controller is PIC16F628A, more details will be shared in private chat.

    $106 (Avg Bid)
    $106 Średnia Oferta:
    18 składanie ofert

    Design pcb to house an esp32 module and associated electronics to make distance measurements from 10m...connector. Do not want ultrasonic modules on pcb, u must design that circuit yourself. The esp32 will be going into deepsleep, so u must shutdown any current that will drain the battery. Pcb must accept battery holder. Esp32 module must be esp32-wroom Sensor must be waterproof, see image Details on sensor: Only use SR04T Waterproof Ultrasonic ,see article.. Deliver the following: pcb, schematic and libraries (kikad or eagle) Manuf gerbers Excelfile with bom (must have digikey, mouser or RS links)

    $153 (Avg Bid)
    $153 Średnia Oferta:
    20 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. I will ask you a question, which you must answer correctly, to prove to me that you are very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you would like.

    $19 / hr (Avg Bid)
    $19 / hr Średnia Oferta:
    20 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days that are convenient for you to work. You may work at any hour of the day (or night) that you prefer.

    $20 / hr (Avg Bid)
    $20 / hr Średnia Oferta:
    8 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $19 / hr (Avg Bid)
    $19 / hr Średnia Oferta:
    12 składanie ofert

    Developer a microcontroller (in the beginning could be Arduino, etc. - later own controller hw) application that does control temperature on a device and modifies performance settings (volt, amps) based on some characteristics. It uses input and output information via a touch display or OLED/steering buttons. Needs to control also a few actuators/relays.

    $421 / hr (Avg Bid)
    $421 / hr Średnia Oferta:
    62 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $14 / hr (Avg Bid)
    $14 / hr Średnia Oferta:
    9 składanie ofert
    AutoPlay Fifa 22 PS4 Zakończone left

    am trying to make a project using arduino or another microcontroller to make the ps4 controller autoplay in fifa ultimate team i have tried to do it by myself using this website but the library is only made for sending data from the controller to the arduino and actually what i want to do is to send data from arduino to ps4 controller then to ps4 console in order to autoplay in fifa ultimate team

    $270 (Avg Bid)
    $270 Średnia Oferta:
    7 składanie ofert
    Waveform Generator Zakończone left

    I require a programmer to develop both firmware and GUI for a waveform generator using AD9106 and STM microcontroller You must have relevant experience in device programming along with schematic and pcb design. Fusion 360 access desirable More information will be given to suitable applicant for this project.

    $710 (Avg Bid)
    $710 Średnia Oferta:
    23 składanie ofert
    AutoPlay Fifa Zakończone left

    am trying to make a project using arduino or another microcontroller to make the ps4 controller autoplay in fifa ultimate team i have tried to do it by myself using this website but the library is only made for sending data from the controller to the arduino and actually what i want to do is to send data from arduino to ps4 controller then to ps4 console in order to autoplay in fifa ultimate team

    $192 (Avg Bid)
    $192 Średnia Oferta:
    5 składanie ofert

    We are looking for experienced C developer for microcontroller: Development Tools and Environments: TI MSP-FET430 Flash Emulation Tool (FET). The FET is the program development tool for the MSP430™ ultra-low-power microcontrollers Main CPU Application: MSP430 series The following environment: C coding over IAR compiler for TI MSP430 (EW430-MB) for MSP430 micro-controller.

    $8 / hr (Avg Bid)
    $8 / hr Średnia Oferta:
    12 składanie ofert
    Project for Asad S. Zakończone left

    Hallo, i would like to do a project in bearing current elimination using microcontroller in PLECS for asynchronous motor with Inverter.

    $146 (Avg Bid)
    $146 Średnia Oferta:
    1 składanie ofert

    Hello Concerns, We want to develop a Wifi + RF-based CCT and RGB Controller module. Microcontroller-based, it should be an industrial grade it is not a DIY project. PCB Size will be 80MM*60MM. Please refer to the attached block diagram.

    $118 (Avg Bid)
    $118 Średnia Oferta:
    5 składanie ofert

    Hallo, i would like to do a project in bearing current elimination using microcontroller in PLECS for asynchronous motor with Inverter.

    $146 (Avg Bid)
    $146 Średnia Oferta:
    1 składanie ofert
    PCB Design Zakończone left

    Industrial PCB design must have knowledge on Arduino and STM microcontroller and IOT module like EPS32 , Temperature module Communication module.

    $103 (Avg Bid)
    $103 Średnia Oferta:
    25 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am looking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $17 / hr (Avg Bid)
    $17 / hr Średnia Oferta:
    7 składanie ofert

    Hello, I am looking for someone to design a PCB board to control a small electric water pump. The pump will turn on for 2-3 seconds every 30-60 seconds and will check for water. If the electric pump has a load on it (from water) the pump will stay on until the load is no longer present. I would like this to use a microcontroller so we can reprogram and change the check time (anywhere from 30-60 seconds). Thanks

    $425 (Avg Bid)
    $425 Średnia Oferta:
    57 składanie ofert
    Project multiplexor Zakończone left

    It is a HW development that consists of implementing a multiplexer in an existing circuit. Files of this circuit will be provided (circuit with microcontroller, wireless module and power supply circuit). PCB has a specific shape that also will be provided. Technical details have been provided previously.

    $39 (Avg Bid)
    $39 Średnia Oferta:
    1 składanie ofert
    Circuit Board Design Zakończone left

    My project consists in a circuit board which is responsible for communicate with the internet and triggering 4 electronic locks of 3V 1.5a using relays. Due to high inductance generated by the electronic locks, it is necessary that the circuits of the locks are isolated from the microcontroller circuit to avoid crashes/bugs. The board must have a circuit of lithium battery which must provide an autonomy of at least 8 hours. This circuit will be activated when the site is without power. To connect the ESP32 to the internet, a 4G modem is connected to the board. The board must have a female USB connector to power the 4G modem. The female USB connector must have a circuit capable of having its power interrupted by a command sent by an ESP32 I/O port (After a few hours of in...

    $224 (Avg Bid)
    $224 Średnia Oferta:
    19 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am looking for either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, instead of someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $14 / hr (Avg Bid)
    $14 / hr Średnia Oferta:
    12 składanie ofert

    I am using the google coral devboard (imx8mq) instead of raspberry pies because pies are hard to get. I would like to be able to flash new code onto an attiny10 with the coral like I could with the pi. The github claims it is simple to port the code to any platform even a microcontroller, but it's a bit over my head.

    $133 (Avg Bid)
    $133 Średnia Oferta:
    6 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, instead of someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $13 / hr (Avg Bid)
    $13 / hr Średnia Oferta:
    13 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am looking for either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is also a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, rather than someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $14 / hr (Avg Bid)
    $14 / hr Średnia Oferta:
    10 składanie ofert

    Fully Motor protection under/over load High/low voltage n built timer etc.

    $731 (Avg Bid)
    $731 Średnia Oferta:
    14 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, rather than someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) which you prefer.

    $15 / hr (Avg Bid)
    $15 / hr Średnia Oferta:
    7 składanie ofert

    Hi all. Using the Arduino IDE, I need to use a microchip SAM L21 MCU in my circuit, with a Watchdog feature. Unfortunately , the watchdog setup is well documented on the SAMD21 chip (lot of tutorials and sample code online), but not...SAMD21 is ) You don't need to have access to a SAML21 hardware, just to provide a functional code that compiles with no error. Technical info : the Arduino board manager uses the following board library : (version 1.6.18-beta-b1) The arduino setup is : Board: MattairTech Xeno Mini Microcontroller :SAML21G18B Documentation from Microchip :

    $121 (Avg Bid)
    $121 Średnia Oferta:
    13 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as an Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, rather than someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) which you prefer.

    $45 / hr (Avg Bid)
    $45 / hr Średnia Oferta:
    17 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as an Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, rather than someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) which you prefer.

    $20 / hr (Avg Bid)
    $20 / hr Średnia Oferta:
    11 składanie ofert

    The purpose of this project is to develop an electronic design for an early stage proof-of-concept prototype motion detector for a specific application. A successful design will successfully integrate three independent Senba Sensing Tech. BS-612 smart PIR modules with an Adafruit Feather M0 microcontroller development board. The integration will allow the sensitivity of the PIR modules to be independently controlled via AnalogWrite PWM. The scope of the project is delivery of a working schematic design. No Arduino code is required. No PCB layout is required. Acceptance will be based upon the results of breadboarding the circuit and confirming functionality. This project will be the first in a series of many electrical engineering projects that will ramp up as product development a...

    $1070 (Avg Bid)
    Projekt z Umową o Zachowaniu Poufności
    $1070 Średnia Oferta:
    12 składanie ofert

    You must live in the Western Balkans, Eastern Europe, Latin America, or the Caucasus. I am seeking either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just as an Arduino is a microcontroller). Why don't I require any experience? I would prefer to work with someone who is inexperienced, yet very intelligent, rather than someone who is experienced, yet not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days which are convenient for you. You may work at any hour of the day (or night) which you prefer.

    $20 / hr (Avg Bid)
    $20 / hr Średnia Oferta:
    14 składanie ofert

    We are looking for professional expertise within the IoT field. We are looking for a full stack developer that has knowledge in both hardware / microcontroller programming but Is also able to present development capabilities in Web Development. We are a startup in the Energy and Photovoltaic sector and are looking for trustworthy and professional people with experience to assist us in future development within a long-term business partnership. If you should only have individual skills from the list below, please mention your skillset explictily. For this project we have a smart energy meter that is connected to raspberry interface which acts as our gateway. The raspberry pi connects via RS485 MODBUS to the smart meter. Project: The connection between the raspberry pi and the smar...

    $644 (Avg Bid)
    $644 Średnia Oferta:
    48 składanie ofert

    Required microcontroller program with pdf file download

    $89 (Avg Bid)
    $89 Średnia Oferta:
    14 składanie ofert

    You must live in the Western Balkans, Eastern Europe, or Latin America. I am looking for either a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). Why don't you need any experience? I would prefer work with someone who is inexperienced, but very intelligent, rather than someone who is experienced, but not very intelligent. You must be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer

    $18 / hr (Avg Bid)
    $18 / hr Średnia Oferta:
    18 składanie ofert

    PIC24F MICROCONTROLLER programming as SPI Slave to interface with a controller and sensor . Sclk is 500kHz and more, bit banging is not working due to speed. Need to interface ssi protocol as SPI SLAVE PROTOCOL. for more details discuss in chat.

    $120 (Avg Bid)
    $120 Średnia Oferta:
    12 składanie ofert

    You must live in the Western Balkans, Eastern Europe, or Latin America. I am seeking for a high school student or a university student to help me build an Internet of things (IoT) device using MicroPython on the ESP32. (ESP32 is a microcontroller just like Arduino). Why don't you need any experience? I would rather work with someone who is inexperienced yet very intelligent, rather than someone who is experienced yet not very intelligent. You need to be able to work five days each week for one hour each day. You may choose the five days that are convenient for you. You may work at any hour of the day (or night) that you prefer.

    $26 / hr (Avg Bid)
    $26 / hr Średnia Oferta:
    4 składanie ofert

    The project is about a simple RGB LED to drive. The color can be Red/Green/Blue depending the status. The status can be 1, 2 or 3. The status can be read by website: The value is random. For testing porpose you can test with mode: The website will return the mode and RGB value to display on LED. Power: +5V from USB (max 1.2A) The interval to update the LED is about 20 seconds. Possible part list (sample file attached): 1. MCU 2. LED strip (>500mW) Delivery: - PCB source file for EasyEDA (or similar to order PCB) - Part list - Arduino code source file How we will test: - Let the PCB produced by manufacturing (5 pieces) - Order and solder the parts from partlist on your PCB - Upload the Arduino program - Let the LED work and check if all 3 states are coloring correct - Let the ...

    $152 (Avg Bid)
    $152 Średnia Oferta:
    42 składanie ofert

    Need to program an existing microcontroller based circuit board from scratch according to the defined logics. The basic outline of requirement is to collect the data sets from other devices connected to this board via RS485/232 and transmit the data to internet through gprs device. Vice-versa the same can be received back from a software application program and be used for running the logics in the microcontroller.

    $379 (Avg Bid)
    $379 Średnia Oferta:
    18 składanie ofert
    eclipse at linux Zakończone left

    i want to setup eclipse at linux to develop avr & arm microcontroller arab engineer

    $22 (Avg Bid)
    $22 Średnia Oferta:
    7 składanie ofert

    I am looking for someone who will work on the mentioned IVRS project some part already programmed mostly using suitable WIFI or ethernet supported microcontrollers with 2G GSM module .The project planned will be used for small and medium businesses and have feature like the mentioned using DTMF selection The IVRS system will work for usual small/medium Indian business 1..Greetings and the selection of option will divert the call to particular number 2. simple web interface with lightweight webserver and storage onboard chip to enable users see the call history(based on memory capacity like last 10 etc) and make changes to values like change numbers that will be dialed etc

    $26 (Avg Bid)
    $26 Średnia Oferta:
    2 składanie ofert

    Need this in 1 day This is the board that must be used Dragon12-Plus-USB Trainer For Freescale HCS12 microcontroller family Digital clock Use the lights to display the time in binary or some encoded fashion OR use the LCD to display the time You have the option to: Choose a Pre-Selected Project from the Sample Project list in the Course Information section. Choose your own project to be completed using Dragon12-Light Board DVB-023DB.

    $20 (Avg Bid)
    $20 Średnia Oferta:
    3 składanie ofert

    Electric fireplace. Need product Schematic, PCB design and it's microcontroller programming. It have two PCB. 1 PCB have ir sensor, 7 led, 5 push switch. 2 PCB need 4 15A relay and AC voltage regulator through PMW signal. Ir remote control need? 1 switch system Power ON/OFF 2 Switch time control. It is press first time then ON time set 30min and press second time set time 60min. it total have 4 time till 120min. 3 Switch use dimmer low 4 Switch use dimmer high 5 switch use fan ON/OFF. it have auto OFF. If device run regular without any changes then it auto OFF after 240min.

    $137 (Avg Bid)
    $137 Średnia Oferta:
    1 składanie ofert

    ...the project. I have an enclosure designed that is 3D printed. The rectangular enclosure consists of a FRAME that has removable panels on all six sizes (TOP PANEL, BOTTOM PANEL, LONG SIDE PANEL, SHORT SIDE PANEL). See files 'FRAME ' and 'small enclosure '. Featureless panels may be used on any of the six sides, or panels designed for mounting a specific component (display, microcontroller, rocker switch, battery, etc) may be used. You will be designing custom panels that will accept the mounting of a specific component. The project consists of five (5) tasks/milestones. Details on each task are found in the file 'CAD task '. All five tasks should be easy to complete by someone skilled in SolidWorks in less than 3.0 hours, but I have budgeted the ...

    $109 (Avg Bid)
    $109 Średnia Oferta:
    41 składanie ofert

    i need someone who can program an arduino or a stm32 microcontroller. the objective is to use the method of the extended Kalman filter to determine the level of charge (SOC) of a lithium-ion battery. the following pdf file describes a similar project that has already been done

    $92 (Avg Bid)
    $92 Średnia Oferta:
    9 składanie ofert