Inżynieria budowlana Jobs

Need to make some changes in PDF and Cad files as show in file # 4 ( ARCHITECTUAL PLANS HOLLOW CORE ROOF). 1- Raise the back wall 9 ¼” as slope, so the water can run off at the front of the house from the flat roof. 2- Add three 16”X16” CMU (8’X16”) columns at 13’-8” far from the back wall of the house at the right wall, left wall and the big bathroom corner. 3- Two Steel beams to sit on the columns. Spans are 22’-4” and 21’. 4- Change the roof trusses to two groups of 10” hollow core slabs. Spans are 13’-8” and 23’- 4” to sit on the back and front walls and the beams. 5- Kitchen stove, sink, refrigerator and hot water heater. Bathrooms showers, toilets and sinks. 6- In the founda...

I have a house in Tabernash, CO. I’d like to put a swim spa on the deck. I need a consultation on what shoring up is necessary given its current construction, with doubled up stringers but no second beam or posts on the house side of the deck.

Need an engineer to design for removal of interior structural wall

Seeking someone to design my new roof and attic flooring trusses to send the plan to the truss builders. We do not want any interior second floor walls as structural walls.

40 x 60 building to be built on Alabama. Need stamped drawings for city permitting. In addition, would need site plans, MEP, and architectural.

I need roof truss engineering for a house I’ll be building. Probably wouldn’t hurt to do it in cad but attached is along the lines of what I need. Roof truss engineering, blueprint is not very descriptive, I live in macomb Michigan for snow load referencing

1. Im looking to build a home for personal use. 2. Looking for a standard but nice looking home but not custom home. Three beds two baths, garage. 3. Budget including home and 40k lot is 170k 4. In ocala Marion county. 5. Lot in the process of choosing site. Lot will be around 0.26 acres to build a 1,350sq ft home plus garage 300 sq ft. We are in the process of lot acquisition so it will be a 0.26 acres. the architect should know what is needed to get us approved for construction license, but I've attached a checklist of what is required from Marion County. The Architect should know what applies to them as per checklist The architect must have a proper license and active and good standing because signature and stamps are required as per Marion County Florida. A structura...

I need structural drawings for this house...stamped in North Carolina.

I need blueprints made up of 2 permanent awnings for work, and a sign off from a structural engineer. Awning 1: 10’x20’ -Lean-to style roof -5x10 of the awning is storage -3 doors to the storage area -front half of the roof is Corrugated galvalume -the roof over the storage area is Tan PVC Roof Panel -hidden fasteners -it may need footings -no cedar Awning 2: 8x8 -Lean-to style roof -4’x8' of the awning is storage -2 doors to the storage area -front half of the roof is Corrugated galvalume roof panels -the roof over the storage area is translucent corrugated PVC Panels -it can be bolted into asphalt -hidden fasteners -no cedar

Add a structural canopy to an image. More details to flw

Have a design/build project for a church in Antioch, TN from the ground up. Existing site has an improved building to be moved. Site has power, public water and septic. Church to be 5k s.f. Have site photos when required.

I need a civil engineer that will help us put together an appeal document to an bord pleanala to appeal a Planning permission that has been granted for a new housing estate in Blessington Co. Wicklow.

I want a 3D layout and complete structural diagram for a new grocery shop. Anyone who have experience in commercial building design only can understand the project. I want complete structural plan, ventilation plan, plumbing plan, wiring plan, everything. Plot size is 25ft X 75ft, North facing, Front 25 ft.

The basis of this paper is based on isogeometric analysis, which is a kind of finite element, the investigated plate is the same as the Kirchhoff plane. The work that needs to be done can be done in several parts, the first part is to create a simple plate Kirchhoff code based on the methods in the paper, and the next part is to make a composite the plate and calculate the stresses based on the paper. The critical point is that the work should be done in Python. and more importantly, using the nutils library. We should be able to get the output of the article using this library, I insist that we need to make a code based on nutils library and approaches in the paper and get all the results of the paper.

Hi All, we are looking for an engineer to run some structural calculations on a new solar car shade system made from alumnium. The ideal canditate will have experience of working with aluminium extruded sections, connections and profile design. We have the basic concept drawing we just need to engineering undertaken on the profile to prove the design works

Structural engineering plans.. roof, shear wall, attic, foundation

I am looking for an engineer in Canada, as I reside in New Brunswick, to sign off on my final plans that were initially signed off by an engineer but the contractor varied the roof pitch during the build from 2/12 to 1/12. So, I just need the final plans stamped off. I have copies of all of the plans submitted and the final plans which are the same of original with just the change in pitch? Thanks in advance.

I am a builder, developer designer who does his own plans. I need an engineer who will review, markup, then sign our drawings. I have been working with the same engineer for 20-yrs but he is retiring. I have lots of work. Freelance Per sheet or per hour negotiable

We have a whole big plot of land with approx 120 homes that can be built. Would like to talk to you regarding design and project.

I need to design a 1000sft farmhouse, prefab type construction, based on Steel & glass modern style home design. This will be pre built in our factory and sent to site. Freelancers from India, Telangana, Hyderabad will be preferred. If you are overseas and have a ready similar design then can offer your services.

I need a competent civil and structural engineer who have a backgrounds on the design process. The bridge is 40M long and a standard width. Kindly reply with P.D.F of the previous projects. we can discuss more later.

I'm designing a custom water vessel for my residence. The county is asking for the CMU to be engineered to issue the building permit. See attached...

Simple 2 car 20'x20' carport with 20' 4x12, 16' span, as the structural horizontal elements. I drew up a preliminary plan that is waiting on an Engineers input and corrections before I finished the plans. I am really doing this as support for a close friend. BTW I have decades of experience in Seismic Rehab and geotechnically challenged hillside design and construction. My previous Engineer i sno longer is business so I am looking for another coorperative CA Engineer.

I have drawings for a 60 x 60 floating stage and need them stamped for the state of CT. Drawings are being produced now by the manufacuteres. Just need material revied and stamped for the State of CT

I m looking for collaboration, on behalf of my company, with people who has technical expertise and networking in the field of Construction, Architecture, Interior and civil. We are a company providing outsourcing Engineering services in India. Experts in BIM, AutoCad, MEP solutions, Sustainability Solutions, Construction Drawing, Construction Documentation and so on. We are currently serving in 6 countries. Looking for expansion in Australia & European Countries. The budget is negotiable based on your role involvement in the process.

We are looking for a candidate to join our team to work on an hourly basis 4-8 hours per day, 5 days per week, on-going basis. This job posting is for selecting the candidate and familiarizing them with our process until they're hired on an hourly basis. There will be a bonus at the end of this project if you've proven yourself to be competent in doing this job. - Need to be available to work between approximate hours 7.30am - 4.00pm Melbourne, Australia time (GMT+11) (This has soft flexibility). The Applicant must have: - Very good AutoCAD and drafting skills. - Quick learner and pays attention to detail. - Good written and verbal English skills so we can communicate and teach you effectively. - Engineering or Surveying background is an advantage. - Be able to follow ...

Insurers dealt with a subsidence claim on my property approx 8 years ago - for a new insurer to provide an insurance premium quotation they require a report from a structural engineer that there has been no further movement. House is in Chelmsford - CM2

Build a Modular style Stainless Steel lifter SWL is 2 Ton Have to design a portable model of the crane. The project is divided into 2 phases: 1) Preparation of Concept Design 2) Preparation of Fabrication or Manufacturing Drawing All details will be shared in chat. Kindly be ready to share your work for reference. We want someone creative and have knowledge in designing material handling lifters or industrial lifters. Don't waste your time if you have no knowledge of this industry.

I need structural design for a deck to be built at the back of my home the proposed decking is 45m2 and will be elevated aprox 650mm from the ground level. Decking to be used is composite and to be installed direction shown on drawing . The plot is on a flood zone as we are doing a knock down re build we have all plans and drawings from builder if required.

We run a boutique structural engineering firm in New Zealand, where we currently require the services of structural CAD technician/draftsman to work on a project by project basis. This will be ongoing role for the right candidate. Position Summary: The Structural CAD Drafter will be responsible for producing detailed structural engineering drawings for a variety of construction projects. The ideal candidate will have a good understanding of New Zealand/Australian building codes and construction techniques, as well as experience using CAD software to create accurate and detailed structural drawings. Key Responsibilities: • Produce detailed structural engineering drawings using CAD software. • Review and interpret architectural and engineering plans to ensure compliance. &bull...

I would like to add a third bedroom to my two bedroom apartment by closing off a section of the living area and moving some internal walls and a door. I need the expertise of a structural engineer to tell me if this is possible and what might need to be considered when planning this renovation, and to write a report to support my planning application should it be possible.

I recently purchased a piece of property that only perfect for two bedroom home. I need an septic engineer to reduce the flow rate, to accept a three bedroom home.

I need a 5' high retaining wall, built out of pressure treated lumber--preferably leaving the option for using 4x4s or 4x6s in their upright orientation. The city requires me to get engineering after the wall is more than 4' tall, so I'm just outside of range. I would like the wall to be designed in two tiers: The bottom tier at 30" tall, followed by a bench or terrace that's 33" deep, and then a top tier that's another 30" tall. It will need to run a length of 55', in case that's relevant. ** The design will need to be stamped by an engineer who's license is accepted by North Carolina: Send your license number along with your proposal or questions. **

required method statement and risk assessment for a building demolition project which includes demolition of 46 warehouses the plan of the welfare takes place in warehouse number 386 as it already has existing 2 offices and a toilet and a labour rest area and labour mace, plan should include cleaning general maintenance and rehabilitation for the warehouse includes furniture, painting, water tank, and water delivery and electricity provided by generator etc. Attached warehouse photo from outside attached site warehouses demolition plan and HSE plan for project reference name and existing project details, including warehouse number 386